And also need to comply to the required tensile strength and yield strength. Seamless Pipe SMLS : It covers stainless steel seamless pipe that manufactured in any process that can not be involved in the welding process. Welded Pipe WLD : It covers welded pipe that manufactured by an automatic welding process that does not add filler metal during welding. Do not use fillers during welding. After approval by the purchaser, the welded pipe and HCW pipe with an NPS greater than NPS 14 shall have a single longitudinal weld or shall be manufactured by forming and welding two longitudinal sections of flat stock. So each welds are to be tested, inspected, inspected or treated.
|Published (Last):||25 September 2006|
|PDF File Size:||5.82 Mb|
|ePub File Size:||15.48 Mb|
|Price:||Free* [*Free Regsitration Required]|
The pipes shall be sorted into five different classes. Class 1 pipes shall be double welded by processes employing filler metal in all passes and shall be completely radiographed. Pipes of Class 2 shall be double welded by processes employing filler metal in all passes with no radiography. Both Class 3 and Class 4 pipes shall be single welded except that the weld pass of the latter exposed to the inside pipe surface may be without the addition of filler metal.
Pipes of Class 5 shall be double welded by processes employing filler metal and shall be spot radiographed. Weld defects shall be repaired by removal to sound metal and rewelding. Subsequent heat treatment shall be as required on the original welds. The finished pipes shall be subjected to transverse tension test, transverse guided-bend weld test, and hydrostatic test. The selection of the proper grade and requirements for heat treatment shall be at the discretion of the purchaser, dependent on the service conditions to be encountered.
No radiography is required. Several grades of steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, chromium, nickel, molybdenum, titanium, columbium, tantalum, nitrogen, vanadium, copper, cerium, boron, aluminum, and others. Tensile properties of the material shall conform to the prescribed tensile strength and yield strength.
The steel pipe shall undergo mechanical tests such as transverse or longitudinal tension test and flattening test. Grain size determination and weld decay tests shall be performed. Each pipe shall also be subjected to the nondestructive electric test or the hydrostatic test.
Scope 1. Impact testing may, under certain circumstances, be required. For example, materials with chromium or nickel content outside the AISI ranges, and for material with carbon content exceeding 0.
ASTM A312 TP 304 / 304L Stainless Steel Seamless Pipes and Tubes ( UNS NO S30400, UNS NO S30403)
ASTM A312 TP304 Seamless Stainless Steel Pipe